The best vape mods and box mods of 2025 are Vaporesso Gen 200 Vape Mod, Vaporesso Armour Max Vape Mod, Voopoo Drag 5 Mod, GeekVape Aegis Legend III Vape Mod, and Lost Vape Centaurus N200 Vape Mod. A vape mod is the lower part of an advanced vaping device that features a battery to provide power to the coil and control the overall performance of the vape with advanced chipsets.
Popular vape mod types are box mods, pod mods, squonk mods, mechanical mods, and tube mods. Regulated mods use built-in chipsets that control the wattage, voltage, and temperature and provide safety against overheating, short circuits, and low batteries. Unregulated mods do not feature a built-in circuit for safety and customisation, which results in a direct, unregulated power supply to the coil.
It is recommended to avoid using your vapes in the rain because the moisture can seep into the device, damage the battery, and lead to a short circuit. You can buy the best vapes in the UK from vape shops and online stores such as Vape Club, Vape Superstore, VapeConnect, and Vape Store.
1. Vaporesso Gen 200 Vape Mod
Vaporesso Gen 200 vape mod is a lightweight vape mod designed for sub-ohm vaping and dense, flavourful cloud production with high power output up to 220W. This vape device uses dual 18650 batteries that are sold separately and a USB-C charging port for quick charging with a 5V/2A charger.
Vaporesso Gen 200 vape mod features an AXON chip for fast power supply and efficient temperature control, and it offers customisable power output between 5 W and 220 W. This vape mod helps users select different power modes, including pulse mode with tiny bursts of power for consistent flavour, F(t) mode with temperature, heat, and time control for rich flavour, and VW (voltage/wattage) mode for manual power adjustments. It comes with a 0.96-inch TFT (thin film transistor) screen to display battery percentage, wattage, and coil resistance, which helps users monitor their vaping activity.
Vaporesso Gen 200 vape mod weighs only 76 grams and is crafted with zinc alloy, fire resistant polycarbonate, fingerprint free rubber coating, and a metallic spray layer for lasting performance and durability. This vape mod has a 510 tank connector, which makes it compatible with a variety of tanks and is available in dark black, matte grey, light silver, midnight blue, sunset glow, and aurora green colours. Vaporesso Gen 200 vape mod comes with a GEN 200 mod, Type-C cable, user manual, and a warranty card.
2. Vaporesso Armour S Vape Mod
Vaporesso Armour S vape mod is a durable, armoured, single battery, and box shaped vape mod for direct to lung (DTL) vaping with output wattage ranging from 5W to 100W. This vape mod uses a 21700 or 18650 battery for a consistent power supply and a Type-C charging port for fast charging with a 5V/2A current.
Vaporesso Armour S vape mod features an advanced AXON chip that provides increased power and supports three power modes, including F(t) mode, pulse mode, eco mode, and three temperature modes that are TC-SS mode, TC-NI mode, and TC-TI mode for full customisation. This mod has a uni lock feature for both firing and lock/unlock, and it has armoured TPU (thermoplastic polyurethane) protection with resistance to drops and scratches.
Vaporesso Armour S vape mod has a 0.96" TFT (thin film transistor) screen, and it is available in cyber gold, cyber blue, camo blue, camo brown, orange, yellow, black, green, and silver colours. Vaporesso Armour S vape mod comes with an Armour S mod, Type-C charging cable, 2 O-rings, an 18650 sleeve, a user manual, a warranty card, and a safety manual.
3. Vaporesso Armour Max Vape Mod
Vaporesso Armour Max vape mod is an advanced, durable, and box shaped dual battery sub ohm vape mod that is suitable for direct to lung (DTL) vaping with adjustable wattage from 5 W to 220 W. This mod uses two 21700 or 18650 batteries for lasting performance and a USB-C charging port for fast charging when paired with a 5 V/2 A current.
Vaporesso Armour Max vape mod has a built-in AXON chip that increases power for quick firing, rich flavour, and dense vapour production. This mod provides different power modes that are F(t) mode, pulse mode, and eco mode, and three temperature modes that are TC-SS mode, TC-NI mode, and TC-TI mode for full customisation.
Vaporesso Armour Max vape mod features a 0.96" TFT (thin film transistor) screen to display battery, wattage, voltage, coil resistance, and puff count, so you can monitor your vaping activity. This mod comes in cyber gold, cyber blue, camo blue, camo brown, orange, yellow, black, green, and silver colours, and has a TPU (thermoplastic polyurethane) protection body with a uni lock feature for convenient use. Vaporesso Armour Max vape mod box contains a Vaporesso Armour Max Mod, 2 18650 sleeves, a Type-C Cable, a user manual, a warranty card, a safety manual, and a reminder card.
4. Voopoo Drag X Plus
Voopoo Drag X Plus is a single battery, box-shaped vape mod which is suitable for both intermediate and expert vapers with adjustable power output ranging between 5 and 100 W. This vape mod uses a single 21700 or 18650 battery and USB-C port to charge quickly with a 5 V/2 Acharger, so users do not have to wait long for the battery to recharge.
Voopoo Drag X Plus features an advanced GENE FAN 2.0 Chip that provides consistent and increased power output with two modes, including smart mode for automatic settings adjustment and RBA mode for full customisation. It has inbuilt protections from overtime, short circuits, overcharge, overcurrent, over battery discharge, overtemperature, max power, and battery reverse current.
Voopoo Drag X Plus is made with zinc alloy and leather for easy grip and features a 0.96-inch TFT (thin film transistor) screen to display wattage, voltage, puff count, and coil resistance. Voopoo Drag X Plus has a 510 tank connection that makes it compatible with the PnP pod tanks and TPP pod tanks and supports a range of coil resistance from 0.1 to 3.0 ohms. Its box contains a Drag X Plus Mod with sandy brown, Prussian blue, masala, smoky grey, or classic colour, a USB Type-C cable, and a user guide.
5. Voopoo Drag 5 Mod
Voopoo Drag 5 Mod is a dual-battery vape mod for mouth-to-lung (MTL), restricted direct-to-lung (RDTL), and direct-to-lung (DTL) vaping because of its adjustable wattage from 5 W to 177 W. This vape mod requires two 18650 batteries for long use and has a Type-C port for quick charging when paired with a 5 V/3 A current.
Voopoo Drag 5 Mod features a GENE TT2.0 chip that provides 4 modes, including smart mode for automatic settings, RBA mode for manual adjustments, ECO mode for energy saving, and TC mode for temperature control. It has a bulky, durable body made with zinc alloy and leather for a firm grip with a C-shaped frame to easily remove the batteries, and it weighs 156.58 grams.
Voopoo Drag 5 Mod has a 0.96-inch colour TFT (thin film transistor) screen that displays voltage, wattage, drag time, puff count, resistance, battery percentage, and battery evaluation system. It comes in 7 colours that are black, silver, Sakura pink, gradient blue, sunset orange, gradient brown, and green. Voopoo Drag 5 Mod is compatible with all PnP X coils and has auto protection from over-time use, over current, low battery, chip overtemperature, short circuit, and overcharge.
6. Voopoo Argus GT II Vape Mod
Voopoo Argus GT II Vape Mod is a dual-battery vape mod used for direct-to-lung (DTL) vaping because of its adjustable power output ranging between 5 and 200 W. This vape mod uses two 18650 batteries for a consistent power supply and supports a 5 V/3 A charger through the USB-C port for fast charging.
Voopoo Argus GT II Vape Mod is made with zinc alloy and leather for a strong grip and is IP68 certified for being water, dust, and drop proof. It features a GENE TT 2.0 chip that provides consistent vapour and rich flavour with different modes such as smart mode for automatic power match, RBA mode for 5 to 200 W manual customisation, turbo mode for maximum power, and TC mode for temperature control.
Voopoo Argus GT II Vape Mod has a 0.96-inch TFT (thin film transistor) display to show the wattage, battery, coil resistance, puff count, drag time, and voltage. Voopoo Argus GT II Vape Mod is compatible with all TPP coils and has a resistance compatibility range of 0.05 to 3.0 ohms. It is available in Silver Grey, Carbon Fibre, Dark Blue, Lime Green, and Graphite colours, and features multiple protection systems including overtime, short-circuit, overcurrent, over-discharge, over-temperature, reverse battery, balanced charging with different brand batteries, and overcharge protection.
7. GeekVape Aegis Legend III Vape Mod
GeekVape Aegis Legend III Vape Mod is a box-shaped, high-performance, and dual-battery sub-ohm vape mod, suitable for direct to lung (DTL) vaping with customisable power output from 5 W to 200 W. This vape mod is powered by two 18650 external batteries and supports fast charging through the Type-C port with a 5 V/3 A current.
GeekVape Aegis Legend III Vape Mod features biosensing technology for palm recognition and has an IP-68 rating that makes it water, shock, and dust proof. This mod has a 510 tank connection and is compatible with Geekvape Z series coils of 0.1 to 3.0 ohm resistance. GeekVape Aegis Legend III comes with a built-in AS 4.0 chipset and gives rich flavour and consistent power output even when the battery is low.
GeekVape Aegis Legend III Vape Mod offers five different modes, including power mode for a 1 W increase, ECO mode for working on low power, smart mode for automatic power adjustment, boost mode for maximum power, and TCR mode for temperature customisation. It also has a memory-saving option that saves up to 5 vaping settings.
GeekVape Aegis Legend III Vape Mod’s 0.96-inch TFT screen displays voltage, wattage, puff count, and coil resistance to help vapers track their vaping activity. This vape is available in 10 elegant colours like titanium grey, green, purple, red, blue, black, golden blue, silver, rainbow, and dark grey. GeekVape Aegis Legend III Vape Mod package includes a GeekVape Aegis Legend 3 Vape Mod, USB-C charging cable, and a user manual.
8. Lost Vape Centaurus N200 Vape Mod
Lost Vape Centaurus N200 Vape Mod is a sleek, box-shaped, and durable dual-battery vape mod that gives varying wattage output between 5 to 200 W for direct-to-lung (DTL) and mouth-to-lung (MTL) vaping. This vape mod uses two external 18650 batteries for a continuous power supply and offers fast charging through the USB-C port and a 5 V/2 A charger.
Lost Vape Centaurus N200 Vape Mod is made with a combination of PC, zinc alloy, and stainless steel, with a lightweight design of 108 grams and a transparent matte shell for durability and a stylish look. Lost Vape Centaurus N200 mod features a Quest 2.0 chip that provides normal power mode and RDA (DIY) mode for personalised vaping, along with protection from low battery, open circuit, short circuit, 10s over time, and overheating.
Lost Vape Centaurus N200 Vape Mod comes with a 0.96-inch TFT (thin film transistor) screen to display the remaining battery, wattage, puff count, drag time, and coil resistance for the ease of vapers. Lost Vape Centaurus N200 package includes a Centaurus N200 Box Mod in grey rock, desert rock, night Sakura, and crystal cave colours, a user manual, a Type-C cable, and a warranty card.
9. Aspire Zelos 3 Vape Mod
Aspire Zelos 3 Vape Mod is an ergonomic vape mod for mouth-to-lung (MTL) vaping with adjustable power output from 5 W to 80 W. This mod device features a built-in battery of 3200 mAh capacity and supports quick charge through the Type-C port with 2 A current.
Aspire Zelos 3 Vape Mod has a combination of cylindrical and box shapes, and it is made with zinc and aluminium alloy for a durable design. The Aspire Zelos 3 mod features an advanced ASP chipset to protect the device from overtime use, short circuits, overheating, low voltage, overcharge, and overdischarge. It offers 5 changeable modes that are Voltage/Wattage, TC, TCR, CPS and Bypass.
The adjustable wattage and voltagemodes help you manually adjust wattage and voltage, and the bypass mode is for full power output without any restriction from the chip. TC mode is for temperature control, CPS mode is for custom power setting, and the TCR mode is used to manually input the resistance change rate.
Aspire Zelos 3 Vape Mod is compatible with all Nautilus coils of varying resistances from 0.1 to 3.5 ohms, so users can have multiple coil options for easy switching between MTL and DTL. It is available in pink, gun metal, metallic silver, black, blue, and red colours with a 0.96-inch TFT (thin film transistor) screen for displaying wattage, voltage, resistance, battery, and puff count. Its box includes a Zelos 3 mod, a USB-C cable, and a user manual.
What is a vape mod?
A vape mod or box mod is the main, lower component of the vape kit that contains the battery and chipsets and acts as the powerhouse of the vaping device, by controlling wattage and voltage. A vape mod consists of a battery compartment, a control chipset, a display screen TFT/LCD/OLED, a firing button, an adjustment button (+/-), a Type-C or micro USB port, a 510 connector, and an outer body chassis.
A vape mod offers advanced customisation options like adjustable wattage from 5 to 300 W and different power modes like smart, eco, and bypass mode. It uses one or two 21700 or 18650 high power, replaceable batteries and built-in batteries of up to 5000 mAh capacity. A vape kit is a complete, all-inclusive kit that contains all the functional parts, such as a mod device for power and a pod tank for holding e-liquid and coils.
What are the different types of vape mods?
The different types of vape mods are box mods, pod mods, squonk mods, mechanical mods, and tube mods.
The various types of vape mods are given below.
- Box mods: Box mods are powerful, box shaped vaping devices that include adjustable wattage, display screens, and chipsets for full control and vapour production.
- Pod mods: Pod mods are compact vaping devices that use refillable or replaceable pods, and are convenient, portable, and easy to customise.
- Squonk mods: Squonk mods are box mods with built-in squeeze bottles that feed e-liquid directly to bottom-fed atomisers and mimic dripping without the mess.
- Mechanical mods: Mechanical mods are unregulated devices that deliver direct battery-to-coil power and require expert knowledge of Ohm’s Law and battery safety.
- Tube mods: Tube mods are cylindrical vape devices that are available in regulated or mechanical options with varying safety and feature sets.
How long do vape mod batteries last?
Vape mod batteries last from 6 to 12 months or about 300 to 500 charge cycles. The lifespan of vape mod batteries depends on the frequency of use, charge habits, type of device, and the battery used.
What is the difference between a regulated and unregulated vape mod?
A regulated mod is an advanced vaping device that uses an internal circuit board to control the power output, voltage, and temperature of the device. An unregulated mod or a mechanical mod is a vaping device that does not contain any safety features or circuitry for regulating power output and voltage.
Regulated mods offer adjustable power control and easy user adjustments with advanced safety features that minimise the risk and make them ideal for all vapers, particularly beginners. Unregulated mods deliver raw battery power without adjustable controls or safety features. They are suitable for experienced vapers only because of the advanced vaping knowledge and careful handling required to use them.
Can I use my vape mod in the rain?
No, you cannot use your vape mod in the rain because water can seep into the vape through the body or airflow hole and cause short circuits or malfunctions. A few raindrops do not damage the vaping device, but it is best to keep all vaping devices away from water, as the moisture harms the outer body and battery. IP68-rated devices like the Voopoo Argus GT II and GeekVape Aegis Legend III have water and dust resistance, but prolonged water exposure is still not recommended.
Is it safe to charge my vape mod via USB?
Yes, it is safe to charge your vape mod via USB, but it is efficient to use an external charger recommended by the manufacturer for removable batteries to avoid overheating or slow charging.
Raeis Mitha
